Using PVC pipes I turned my daughters plain daybed into one fit for a princess.
I used a total of 5 10 feet PVC pipes for this project.
What you need
5 PVC pipe I used 1/2" schedule 40 (thickness)
cut to your desired size. You will need 4 posts, 2 along the sides of the bed, and 4 for the length (these will be connected using the T bars), then one pipe to connect the T for reinforcement.
You will need 4 1/2 PVC connectors at base
4 90 degree 3 way connector
2 t bar connectors
I used a total of 5 10 feet PVC pipes for this project.
What you need
5 PVC pipe I used 1/2" schedule 40 (thickness)
cut to your desired size. You will need 4 posts, 2 along the sides of the bed, and 4 for the length (these will be connected using the T bars), then one pipe to connect the T for reinforcement.
You will need 4 1/2 PVC connectors at base
4 90 degree 3 way connector
2 t bar connectors
***this project will cost more if you don't have sheer panels. I already had these and made the swag holder from dollar store flowers and some leftover ribbon.
No comments:
Post a Comment